Homeowners' pick for heating and cooling across north Florida and the Suwannee Valley

Gas Furnace Repair in Orlando, FL

If you smell gas, leave the house first, then call 911 or your gas utility from outside, and call us after that. With that out of the way, gas furnace repair across Orlando covers the parts that actually fail here: hot surface igniters, flame sensors coated in residue, pressure switches confused by a blocked flue, and control boards that lock out on repeated ignition attempts. We test the sequence from thermostat call to burner light and find where it stops. Reach us by phone or the quote form.

Call (888) 381-2953

Real people on the phone
7 days a week
Quote in writing before any work

Taking calls until 5:00 PM ET

Every major brand, one numberCarrier Trane Lennox Goodman Rheem York American Standard Bryant

The symptoms that lead here in Orlando

The heat blows cold air Failed ignition, no flame, or blower running without a burner cycle
It starts, runs a minute, then shuts off Dirty flame sensor or a safety limit tripping on restricted airflow
I hear clicking but nothing lights Cracked hot surface ignitor, bad gas valve or control board fault

What gas furnace repair actually involves

A gas furnace has a sequence it must follow every time it fires, and heating repair is mostly about finding where that sequence stops. We watch a full call for heat from the thermostat through the inducer, igniter, gas valve, flame sensing and blower start. Most no-heat calls come down to one link in that chain. We work on the gas train and the high-voltage side ourselves because those are not homeowner checks, and we explain what failed in plain words before anything gets replaced.

What we check on the call

We start at the thermostat and the filter, since a clogged filter can trip a limit and shut the furnace down on its own. From there we inspect the igniter, flame sensor, pressure switch and inducer motor, look at the flue and combustion air path, and check the blower wheel and capacitor. We look over the heat exchanger for cracking or scorching. On heat pump homes with gas backup, we also confirm the changeover is calling the furnace when it should.

How we decide repair is the right call

We weigh the age of the furnace, what part failed, and whether the rest of the system is holding up. A bad igniter or flame sensor on an otherwise sound furnace is a straightforward furnace repair and you keep the equipment you have. A cracked heat exchanger is different, because that is a combustion safety issue and we shut the unit down and talk replacement. If a furnace has been through repeated failures across several winters, we say so instead of stacking parts on it.

Orlando coverage

From Orlando we also cover Winter Park, Apopka, Ocoee, Kissimmee, Sanford, Oviedo and St. Cloud.

32812
32814
32815
32816
32817
32818
32819
32820

Related furnace repair work in Orlando

All furnace repair in Orlando → · Gas Furnace Repair across the region →

The same on every visit

Written quote before any work

Covering 89 cities across Florida, Georgia, South Carolina.

A real person answers

Open 7 days, 8:00 AM to 5:00 PM ET.

Independent of every manufacturer

Carrier, Trane, Lennox, Goodman and more. We are not an authorized dealer for any of them.

Gas Furnace Repair in Orlando — quick answers

My furnace turns on then shuts off after a minute. What is happening?

That short cycle usually points to the furnace losing flame after ignition, often a dirty flame sensor, or to a limit tripping from restricted airflow. Change the filter and open closed vents, then call us if it repeats.

I smell gas near the furnace. What should I do?

Leave the house immediately, take everyone with you, and call 911 or your gas utility from outside. Do not flip switches or restart anything. Once the utility clears the home, call us and we will inspect the furnace.

How soon can you get to my house in Orlando?

Call us with your address and what the system is doing, and we will give you a real window rather than a guess. Summer afternoons are our heaviest stretch, so morning calls usually land same day. If your AC is out entirely and the house is holding heat, say so when you call and we will move you up the list.

How it works

Step 1
Tell us the symptoms
You describe what changed. No cold air, a breaker that keeps tripping, water near the air handler, a smell, a noise. That gives us a head start on parts before we ever leave the shop.
Step 2
We diagnose on site
A technician checks the thermostat, the electrical side, airflow through the filter and coil, refrigerant behavior and the outdoor unit. We look at the whole system, because a frozen coil usually points somewhere else.
Step 3
You decide the repair
We explain what failed, what it takes to fix it, and how long the rest of the system is likely to hold up. You pick the repair. We do not start work you did not approve.

Call (888) 381-2953

A real person answers
Open 7 days
Written quote before work starts

Why homeowners call us

Rural routes are normal for usWe drive long stretches between calls and we plan for it. Trucks carry the common heat pump and air conditioner repair parts so a diagnosis does not turn into a second trip on a hot afternoon.
Heat pumps and sandy soilMost homes we visit run a heat pump, and sand, lawn clippings and pollen pack the outdoor coil fast. We clear it, check the defrost side in winter, and show you what we found before we close it up.
Well water housesHomes on well water bring their own quirks, from pump-driven electrical noise to hard water on drain lines and condensate pans. We know where those systems clog and where the slow leaks hide.
Heating repair tooCold snaps in this region are short and hard. We do heating repair and heater repair on heat pumps, strip heat and furnaces, so one crew handles your system in July and again in January.
All major brands, gas & electricOne independent crew for Carrier, Trane, Lennox, Goodman, Rheem and more.
Straight answersIf a system is not worth repairing, we say so, often right on the phone.